eng — CHECK AND ADJUST TRACK TENSION

. MAINTENANCE SERVICE PROCEDURE ADJUSTMENT WARNING WHEN INCREASING TENSION WARNING Prepare a grease gun. 4 - 34 Sincegrease may sp urt out due to the intern al hig h pressur e, do not loosen plug (1) by more tha Do not loosen any ot her parts than plug (1) a t that time. Fur thermore do not turn your face and b ody toward plug (1). If the track shoe ass embly may not be loosened f ollowing the procedures shown here, consult the Komatsu distribut or in y our territ 1. Inject grease t hrough grease fitting (2), using a grease gun . 2.

Move the mac hine back and forth a few times fo r a distance of 5 m (16 ft 5 in) correct, and th in order to confirm th at th e track s hoe tension is en stop the engine. 3. Check the trac k tension again, and if the tension is not c orrect, adjust it again . ump in grease until dimension S becomes zero 4. Continue to p become (0). If the ten excessively w Please contac sion is still loose, the pin and bushin g a re orn, so they must be eith er turne d or replaced. t your Komatsu distributo r for rep airs.