. MAINTENANCE SERVICE PROCEDURE CHECKING thumb at the midpoint between the pulley. If the 13 pressure of the ± 39.8 lbft) 4 - 64 Depress th alternator p ulley and fan mm (0.5 in ) with applied tension is n elt deflects by approx. (58.8 ADJUSTMEN 1. Loosen bolts and nuts Turn n ut (4) clockwis e to move alte deflect s by approx. 13 mm (0.5 in) wi th applied fo rce of appr 6 kg (5 8.8 N). 2. Tighten bolts and nuts (1), (2) and ( 3) to secure alternator ( Tighten ing torque Lock nut(1) and (4): 1 37.2 ± 53.9 N· m (14 ± 5.5k gf·m, 101. Bolt(2): 33.3 ± 4.9N·m (3.4 ± 0.5kgf· m, 24.6 ± 3. 6 lbft) Bolt(3): 127.4 ± 19.6N ·m (13 ± 2kgf· m, 94.0 ± 1 4.5 lbf 3.
Check for damage to the pulleys, an d wear of th e groove a nd belt. Be particularly ca reful to check that th e bel s not in contact with t he bottom of t he groove. 4. I f the b elt has elongat ed and there is no more all owance for adjustment, or if the belt is cut or cracked, re place he belt . placing the belt, operate for one hour, then adjust again. 5. After re placing the be lt, operate for one hour, th en adjust a gain.