eng — CLEAN, CHECK TURBOCHARGER

. MAINTENANCE SERVICE PROCEDURE CLEAN HYDRAULIC TANK STRAINER WARNING engine is stopped, and may cause burns. Wait for the CLEAN ENGINE BREATHER WARNING 4 - 80 temperature to go d own before starting the work. When removing the oil filler cap, turn it slowly to release the internal 1. Remove 4 bolts, then remove cover (1). Wh en doing this, cover (1) may fly off b ecause of the force of spri the cover pushed do wn when removing the bo 2. Hold the top of strainer (4). Remove any dir 3. diesel oil or flus with a new part. 4. When installing, insert strainer (4) into protr uding part (5) of the tank, and assem ble. with bolts. 5.

Install cover (1) The parts and oil ar e at high temperature after the engine is stopped, and may cause serious bur ns. Wait for the temperature to go down before c leaning the engine breather. t dirt may be blown up and cause serious injury. rotective equipment. When using compre ssed air, there is a hazard tha t dirt may be blown up and cause serious injur Always use safety g lasses, dust mask, or other p rotective equipment 1. Wipe away dust around the breather. 2. 3. Loosen the clam Clean the breath p and remove the hose. Re er body with light oil or cle move breather (1). aning oil. 4. Replace O-ring with new one. Coat a new O-ring with engine oil, set it, then in stall breather (1). 5.

Check the breat her hose and pipe. If caked oil (sludge) adhere to insides, repla ce the hose and pipe with new parts. CLEAN, CHECK TUR Contact your Komat su distributor for cleaning and inspection.