eng — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS PRIMARY CONVEYOR START SWITCH This switch (5) sets the primary belt conveyor in motion, and the conveyor transports crushed debris and stones out of the machine. PRIMARY CONVEYOR STOP SWITCH This switch (6) stops the primary belt conveyor, when depressed. JAW CRUSHER START SWITCH This switch (7) sets the jaw crusher in motion, when depressed, causing it to start a crushing work. JAW CRUSHER STOP SWITCH This switch (8) stops the jaw crusher, when depressed. GRIZZLY FEEDER STOP SWITCH This switch (9) stops the grizzly feeder, when depressed.

GRIZZLY FEEDER START SWITCH This switch (10) sets the grizzly feeder in motion, when depressed, and the feeder supplies the crusher with debris and stones, while screening earth and sand from among the debris loaded in the hopper. 3 - 19 HORN BUTTO This s witch (4 ) sounds the h orn, when depressed. Be sure to ho nk it before starting the engine for t he purpose of giving warning to those in the surrounding. Furthermore t he horn begin s to s ound when any of the following situations develops. If t wo or more abnormalities take place at a t ime, the horn continues to sound in the order of (1), (2) and (3) shown in the No.

Items of Abnormality Horn Sounding Mode (1) Engine water temperature abnormal Horn keeps sounding until fuel control dial is set to low idling position. Engine oil pressure abnormal (2) ON and OFF for a second each are alternated three times. (3) All work stopped due to abnormal load applied to belt conveyor. Horn keeps sounding for five seconds.