. OPERATION EXPLANATION OF COMPONENTS CONVEYOR UP/DOWN SWITCH and works only while 3 - 24 CRUSHER CLEARANCE REDUCTION SW NOTICE Operate this switch only after confirming tha t no debris or e arth remains inside the crusher chambe The cleara nce at the jaw c rushe r outlet continues to b e reduced, while keeping this switc CRUSHER CLEARANCE EXPANSION SW The cleara nce at the jaw c rushe r outlet continues to b e widened, while keeping this swit This switch is used to rais e and lower th e primary belt Depress (1 ): The belt conveyor is raised Depress (2 ):
The belt conveyor is lower The belt co nveyor ra ising the switch is kept depress owering cylinde EMERGENCY PUMP DRIVING SWITCH NOTICE The pump drive emergency switch is provided to make it possible to NOTICE The pump switch to perform wor k for a shor t time when there is a failure in the pump control system. It is necessary t o repa ir the a bnormal location as soo n as possible. when som ething unusual t akes place on the pump control system, (e.g. the di splay denotes E 02). Under nor mal condition: T he switch is d Under abn ormal condition: The switch is When the d isplay denotes E02, raise this switch and th e work may be continu ed.