eng — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING 3 - 36 3. Open t he door on the left sid e at the rear part of th e machine. 4. Blow of f mud, dirt, leaves, etc . caught in the radiator fins a nd oil cooler fins(2) with compress Steam or water may well be used instead of compresse d air. While temperature of the cooling wa ter in the radiator is still high, d o not open the radiator cap. Boili Furthermore , when opening the radi ator cap, loosen the cap slightly to relieve t he internal pressure. 1.

Check with a water level sig ht gauge (G) provided on th e fuel tank si de cover on the left si de of the machine that the co oling water l evel is between the FULL and LOW marks i n the sub-tan k (shown in the figure at right). If the cooling water is not sufficie nt, open a cover on to p of the sub-tank and add it up to the FU LL level through the w ater filler. the cap securely. ck for water leakage, and check 2. After a dding coolant, tighten 3. If the s ub-tank is empty, che ck for water leakage, heck the wat er level in the radiator . If the cooling water is i nsufficient, supply water to the radiator and then to the sub-tank.