. OPERATION OPERATION CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING after the engine is stopped and may cause serious burns. Wait for the oil 3. Fully insert dipstick (G) into filler pipe (F), then remove it. 3 - 37 hig temperature to go down before performing t 1. Open t he engine hood on the mach 2. Remov e dipstick (G), and wipe the 4. The oil level shou ld be between the H and L marks on di pstick (G). If the o il level is below the L mark, add engine oil through oil . ngine oil level is higher than the H mark, drain the through drain plug (P), and check the level again. filler (F) 5. If the e excess through d rain plug (P), and check the level agai 6.
If oil lev el is corre ct, securely tighte n the oil filler cap and close the eng ine hood. through oil REMARK When chec king the oil level after the eng ine has been operated, wait for at least 15 minutes af ter stopping th e engine before che cking. ine is at an angle, make it horizontal before checking. I f the mach ine is at a n angle, make it h orizontal before checking.