. OPERATION OPERATION CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING NOTICE top of the hydraulic oil tank. 3 - 39 When removing t he oil filler cap, oil may s purt out, so sto p the engine and wai t for the oil tem perature to go dow n, then turn the cap slowly to release the internal pres sure before rem oving the ca If oil has been add ed to above proper rang e, stop the engi ne and wait f or the hydraulic oil to c ool down, then drain the excess oil from the drain Be sure to park the machine on the level and 1. Check oil level and L lines, th sight gauge (G). If the e oil amount is approp oil level is between the H riate. NOTICE Do not add oil if the l evel is above the H line.
T his will damage the hydraulic equipment and caus e the oil to spurt out. 2. If the oil level i s below the L line, add oil through o il filler (F) on REMARK Since the oil level varies with oil temper ature, keep th e following in mind when checki Oil level is near the L line before star ting the engin (Oil temperatur e: 10 to 30°C (50 to 8 Oil level is near the H line while the e ngine is runn ing normally (Oil temperatur e: 50 to 80°C (122 to 176°F)) CHECK AIR CLEANER FOR CLOGGING 1. Confirm that t panel does no 2. When the mo replace it with For cleaning t AND REPLAC 1. Confirm that t 2.
When the mo new one immediately he elements, see the E AIR CLEANER EL section,"CHE EMENT (PAG CK, CLEAN E 4-25)".