. OPERATION OPERATION CHECK ELECTRIC WIRING WARNING CHECK FUNCTION OF HORN 3 - 40 If the fuses f requently blow or if ther e are traces o f short circuits on the electrical wiring, l ocate t he cause immediately a nd carry or contact your Komats u distributor for If flammabl e materials (dead leave h material immediately. Keep the to p surface of the battery clean and check the breather h ole in the batter y cap. If it is clogged with dirt or du st, wash cap to clean the breathe will cause Check for da mage and improper c apacity of t he f uses, and an y sign of disconnection or short circuit in the electric wiring.
Check also for loose termi nals and tighte n any loosen Pay special a ttention to the wiring of the battery, starter and a lternator, wh en checking Be sure to ch eck that there are no piles of inflammables on a nd around the battery an d remove them, if an For the chec kup and repairs of tro ubles in the battery, consul t the Komatsu distributor in your territory 1. Turn the starting switch to the ON positio 2. Confirm t hat the horn sounds immediatel y when the horn button is pressed. n does not sound, co ntact your Komatsu distribu tor for repair.
ADJUSTMENT OF REAR VIEW MIR ROR Loosen the b olts securing the squa re rear view mirror (1) and th securing the round rear view mirro r (2), and t hen adjust the m positions so t hat there will be no bl ind spot at the rear and left of the machin e and a better view will be available .