STEERING COLUMN-MOUNTED CONTROLS 2. Turn Signal/High Beam Switch To adjust the steering wheel, PUSH and HOLD the lever down fully. Push or pull the wheel to the desired height and angle, then PUSH the lever back into the locked position. NOTE The ignition key must be turned to ON for the signal/switch to operate. The lever-action turn signal/high beam switch is located on the left side of the steering column. Each time a turn indicator is activated the buzzer emits a short beep. 3 Turn Signals Steering Column Unlocked Steering Column Locked Turn Signal To signal a right turn, push the lever forward (clockwise). 3-42 Y53-6060-1C1 (03/17)