OPERATING THE TRANSMISSION Clutch Brake and Travel (9–, 10–, and 11–Speed Transmissions only) the transmission manufacturer's manual that is included with your vehicle for further details. Whether you are upshifting or down shifting, it is best to double clutch. Double clutching is easier on the transmission and on the engine, helping your vehicle match engine speed with driveline speed and achieving clash-free shifts. To double clutch: These transmissions utilize a clutch brake, rather than synchronizers. The clutch brake works by stopping all of the gears in the transmission, allowing you to easily shift into first gear or reverse without grinding gears.
The total stroke of the clutch pedal is about 10 inches. The first part is the release stroke: the part that fully releases the clutch. The last inch engages the clutch brake. During Normal Driving If you want to shift directly into any gear other than first or reverse, depress the clutch pedal only far enough to release the clutch. Pushing the clutch to the floor applies the clutch brake and could cause gear hang-up. 1. Push the clutch pedal down to disengage the clutch. CAUTION 2. Move the gear shift lever to Neutral. 4 During hard-shifting with vehicle not moving Be careful not to apply the clutch brake while the vehicle is moving.
The purpose of the clutch brake is to stop the transmission so that you can shift into a starting gear without grinding gears. Applying the clutch brake when the vehicle is moving causes a braking effect on the drive- train and shortens the service life of the clutch brake. 3. Release the pedal to engage the clutch. This lets you control the rpm of the mainshaft gears, allowing you to match the rpm of the mainshaft gears to those of the output shaft. To apply the clutch brake (while the vehicle is stopped) fully depress the clutch pedal to the floorboard to stop the gears.
With the throttle at idle, select first gear then release the clutch pedal to let the vehicle start forward, until the clutch is fully engaged. See ° Upshifts: let the engine and gears slow down to the rpm required for the next gear. Double Clutching (03/17) Y53-6060-1C1 4-17