OPERATING THE TRANSMISSION ° Downshifts: press accelerator, increase engine and gear speed to the rpm required in the lower gear. helps prevent unnecessary wear to your clutch release bearing, and it is less tiring for you, too. Never coast with the transmission in Neutral and the clutch disengaged. Clutch Adjustment To provide smooth gear engagements while shifting, use proper coordination between shift lever and clutch. 4. Now quickly press the pedal to disengage the clutch and move the gear shift lever to the next gear speed position. Inspect manual clutches according to the manufacturer's recommendations. Regular maintenance should be followed to maintain correct clutch adjustment.
Have your dealer's Service Department perform any adjustment necessary. 5. Release the pedal to engage the clutch. 4 "Riding" the Clutch The clutch is not a footrest. Do not drive with your foot resting on the clutch pedal. It will allow your clutch to slip, causing excessive heat and wear—damage could result. Tips Always use the clutch when making upshifts or downshifts. Always select a starting gear that will provide sufficient gear reduction for the load and terrain. Release Bearing Wear Never downshift when the vehicle is moving too fast. When you must idle your engine for any period of time, shift your transmission to Neutral and disengage the clutch (take your foot OFF of the pedal).
This Never slam or jerk the shift lever to complete gear engagement. 4-18 Y53-6060-1C1 (03/17)