Peterbilt Medium Duty — Automatic and Automated Transmissions

OPERATING THE TRANSMISSION Automatic and Automated Transmissions Hill Hold If your vehicle has an automated transmission, be aware that it can roll backwards when stopped on a hill or grade, or when starting from a stop on a hill or grade. Failure to comply may result in death, personal injury, equipment or property dam- age. Observe the following guide- lines: WARNING! An automatic or automated transmission makes shifting much easier. It remains important to completely understand how to operate the transmission to optimize its efficiency. Please read the manual for your automatic or automated transmission included with your vehicle.

The hill hold feature is available as an option with certain automated transmissions. This feature holds the vehicle while on a hill to allow the operator to release the service brakes and press the accelerator. This feature will hold the vehicle if the vehicle is attempting to go up a hill from a stop in either drive or reverse. 4 For automated transmissions, there is no "park" position. So you will need to apply the parking brake before leaving the cab. When stopped on a hill or grade, press the brake pedal. When starting from a stop on a hill or grade, quickly remove your foot from the brake pedal and firmly press on the accelerator pedal. WARNING!

Do not leave the cab of your vehicle without applying the parking brake. The truck could roll and cause an accident resulting in death or per- sonal injury. Always apply the park- ing brake before you leave the cab. 4-22 Y53-6060-1C1 (03/17)