Peterbilt Medium Duty — More Transmission Tips

OPERATING THE TRANSMISSION Auxiliary Transmission More Transmission Tips Riding the Clutch Never downshift when the vehicle is moving too fast. If you have an auxiliary transmission, see your transmission manufacturer’s manual for its proper operation. The clutch is not a footrest. Do not drive with your foot resting on the clutch pedal. It will allow your clutch to slip, causing excessive heat and wear, damage could result. Never slam or jerk the shift lever to complete gear engagement. Never coast with the transmission in neutral and the clutch disengaged. Release Bearing Wear To provide smooth gear engagements while shifting, use proper coordination between shift lever and clutch.

When you must idle your engine for any period of time, shift your transmission to neutral and disengage the clutch (take your foot OFF of the pedal). This helps prevent unnecessary wear to your clutch release bearing, and it is less tiring for you, too. 4 Double clutching is a very effective means to increase the service life of your transmission. Double clutching refers to a technique where the clutch pedal is used twice per shift instead of once. It also requires that you adjust the engine rpm in the middle of the shift which ultimately synchronizes the gears during shifting. Synchronizing reduces wear on the gears. Tips Always use the clutch when making upshifts or downshifts.

Always select a starting gear that will provide sufficient gear reduction for the load and terrain. (03/17) Y53-6060-1C1 4-23