OPERATING THE BRAKE SYSTEM tractor or trailer resulting in uneven loads, To Maximize The Effectiveness Of ESC Truck Chassis Modifications The vehicle is maneuvering on a high banked road creating either additional side forces due to the weight (mass) of the vehicle or a deviation between expected & actual yaw rates, Loads must be properly secured and evenly distributed at all times. The ESC system was specifically calibrated and validated only for your vehicle’s original factory-built configuration.
If your vehicle’s chassis components are altered (for example; a wheelbase extension or reduction, tag axle addition or removal, tractor to truck conversion or steering system component change) the ESC system must be disabled immediately by a qualified mechanic. Drivers need to exercise extreme caution at all times, and avoid sharp turns, sudden steering inputs or abrupt lane changes at high speeds, particularly if: Gusty winds are strong enough to cause significant side forces on the vehicle and any towed vehicles. a. the vehicle hauls loads that could shift, 4 b. the vehicle or load has a high or off-set center of gravity (CG) when loaded, or WARNING!
Failure to disable ESC "Electronic Stability Control" when modifying a vehicle could result in a loss of ve- hicle control possibly resulting in an accident involving death or personal injury. c. the vehicle tows doubles or triples. (03/17) Y53-6060-1C1 4-31