OPERATING THE BRAKE SYSTEM Improves vehicle control and helps reduce stopping distances in off-road conditions or on poor traction surfaces such as loose gravel, sand and dirt. At speeds between 10 and 25 mph, the ABS control software is modified to allow short periods (0.25 seconds) of locked-wheel cycles. While the off-road mode can im- prove vehicle control and shorten stopping distances, some steering ability may be reduced on certain surfaces resulting from the momen- tarily sliding tires. Always oper- ate your vehicle at safe operating speeds. Failure to do so may cause you to lose control of the vehicle and could result in an accident or personal injury. WARNING!
Allows retarders to function independently of the ABS function. At speeds below 10 mph, the ABS control software is turned off to allow locked wheels. If your vehicle does not have an engine retarder, the Off-Road ABS switch will function the same. When the Off-Road ABS function is enabled, the Retarder Disable output is turned off. That is, the engine retarders are left to function without ABS intervention. For additional information, see the Off-Road ABS pamphlet in your vehicle’s glove box. 4 CAUTION Never drive your vehicle on im- proved roads/highways with the Off-Road ABS function turned on.
When you drive your vehicle onto an improved road surface or highway, immediately turn off the Off-Road ABS switch. Failure to do so will cause the ABS system to not func- tion properly in an ABS event under 25 mph and could result in an acci- dent or personal injury. How The Off-Road ABS Function Works The ABS lamp flashes slowly during off-road mode engagement. This is done to alert you of a modification to the ABS control software. At speeds above 25 mph, the ABS controller operates in the normal on-highway mode. 4-34 Y53-6060-1C1 (03/17)