OPERATING THE BRAKE SYSTEM drive wheel brakes or reducing engine torque. Engine torque or vehicle speed should be reduced to eliminate wheel spin and prevent excessive application of the ATC system. Except for checking for proper illumination of the ABS and traction control warning lamps when first starting the vehicle, and for monitoring these lamps while driving, no special operating procedures are required. For detailed system description, see literature for your specific ABS that was provided with your vehicle. torque to the wheels with better traction. by slightly increasing the permissible wheel spin. When this function is in use, the ATC Warning Lamp blinks continuously.
If all drive wheels spin, ATC reduces engine torque to provide improved traction. Off-Road ABS Function Switch (option) ATC turns itself on and off, you do not have to select this feature. If drive wheels spin during acceleration, the ATC Warning Lamp comes on, indicating wheel spin control is active. Your vehicle may be equipped with a separate switch to activate an Off-Road ABS function. This function is NOT to be used for On-Highway driving but is intended to be used to improve stopping performance in Off-Highway conditions (e.g. loose gravel and mud). The Off-Road ABS function is accomplished by allowing a "wedge" of material to build-up in front of momentarily locked wheels.
Do not allow the ATC Warning Lamp to remain on continuously for an extended length of time. Extended, continuous use of the ATC can cause overheating of the drive wheel brakes. 4 This feature helps improve traction when vehicles are on slippery surfaces or surfaces with poor traction (i.e. mud or snow) by reducing drive wheel overspin. Automatic traction control works in two different ways: Deep Snow and Mud Switch (option) Features and Benefits If a drive wheel starts to spin, ATC applies air pressure to brake the wheel. This transfers engine A deep snow and mud switch is included with Wheel Spin Control. The Deep Snow and Mud feature is helpful during acceleration.
This function increases available traction on extra soft surfaces like snow, mud or gravel, Changes the ABS control limits to allow for a more aggressive ABS function while off-road. (03/17) Y53-6060-1C1 4-33