Peterbilt Medium Duty — Auxiliary Axles - Pusher or Tag

AXLE Axle Creep Rating Definition Creep Ratings ratings are generally limited to the following: Tandem rear axles only Never operate the vehicle with more pressure in the lift axles than is nec- essary to carry the load, as deter- mined by the calibration procedure described. Failure to do so can re- sult in loss of traction and stability at the steer and/or drive axles and can result in increased braking distance which could cause loss of vehicle control resulting in an accident. Fail- ure to comply may result in death, personal injury, equipment or prop- erty damage. WARNING!

Low speed, off-highway (work site) axle loads, which exceed the standard gross axle weight rating (GAWR) of a particular axle. Straight trucks only Maximum spring mount centers per axle manufacturers specifications Operator's using vehicles equipped with liftable auxiliary axles must consider creep ratings when any liftable axle is unloaded or in the raised position. Liftable auxiliary axles should only be raised (or unloaded) to improve maneuverability in an off-road use or when vehicle is unloaded. Maximum tire static loaded radius (SLR) per axle manufacturers specifications 4 CAUTION Always lower the axles as soon as possible after receiving a load.

Never exceed 5 miles per hour when driving with a load with the auxil- iary axle(s) raised/unloaded. Failure to lower the axle(s) can overload the frame and remaining axles, and could cause equipment damage. Axle Creep ratings MUST NOT be exceeded. NOTE Do not modify the air system and/or control functionality on a factory in- stalled auxiliary axle(s). Modifying the factory operation of the pusher and/or tag axle(s) will void your war- ranty, and can cause equipment damage. CAUTION Contact your dealer or axle manufacturer to determine what the creep rating is for your particular axle(s) and configuration. Creep 4-52 Y53-6060-1C1 (03/17)