PREVENTIVE MAINTENANCE SCHEDULE 5 (03/17) Y53-6060-1C1 5-33 PREVENTIVE MAINTENANCE (PM) INTERVALS SYSTEM COMPONENT MAINTENANCE TASK Recommended PM Interval I A B C Electrical & lights Headlamps Check the aim and adjust as required. X Warning lights in light bar Check at the ignition start position to verify bulbs and driver information display function (shown on page 3-11). X Turn, Stop, Reverse lights and signals Visual check. X Alternator Check operation and output. X Check tightness of the pulley nut. X Check the tension of the drive belt (shown on page 5-102). X Check tightness of the terminal hex nuts. X Starter Check torque on hex nuts.
X ECM connector Check the tightness of the ECM connector. X Wheel sensors Check for damaged sensors and connectors, and worn or frayed wires. X