PREVENTIVE MAINTENANCE SCHEDULE 5 5-34 Y53-6060-1C1 (03/17) PREVENTIVE MAINTENANCE (PM) INTERVALS SYSTEM COMPONENT MAINTENANCE TASK Recommended PM Interval I A B C Electrical & lights Fuel and diesel exhaust fluid tank sending unit Check the mounting screws and electrical connections for worn or damaged wires and connectors. X Power supply harnesses (engine, transmission, etc.) Check for worn or damaged insulation, corroded terminals, frayed wires, and oil or fluid leaks on the connectors or wiring. X Wash to remove excess grease. X Cab structure, doors & hoods Hood Lubricate the lower hood pivot (only if lube fittings are present). X Hinges and latch Lubricate with silicone spray.
X Body & cab holddown bolts Check the condition and tightness. X Heating & Air Conditioning Heater & air conditioner Perform the checks listed shown on page 5-118. X Full operational and diagnostic check. X Condenser Clear any debris from the front of the condenser. X