Peterbilt Medium Duty — Cleaning, Protecting and Weather Stripping

CAB Washing the Exterior might scratch the finishes during the washing operation. Do not aim the water jet directly at door locks or latch. Tape the key holes to prevent water from seeping into the lock cylinders. Water in lock cylinders should be removed with compressed air. To prevent locks from freezing in the winter, squirt glycerin or lock deicer into the lock cylinders. CAUTION 1. Begin by spraying water over the dry surface to remove all loose dirt before applying the car wash and wax solution. Do not wash the vehicle in direct sunshine. Do not spray water directly into the cab vents. 4. Wipe everything dry with a chamois to avoid water spots.

To prevent water spotting, dry off the cosmetic surfaces with a clean cloth or chamois. 5. Remove road tar with an automotive type tar remover or mineral spirits. 2. Using soapy water, wash the vehicle with a clean soft cloth or a soft brush made for automotive cleaning. Use cool or warm water and a mild, household type soap. Strong industrial detergents and cleaning agents are not recommended. Do not use stiff brushes, paper towels, steel wool, or abrasive cleaning compounds because they will scratch painted, plated, and polished metal surfaces. 6. After cleaning and drying, apply a quality automotive wax.

NOTE 5 To allow enough time for your truck's finish to cure, wait at least thirty days after the date of manufacture before waxing. Do not apply wax in the hot sun. Never dust off dry surfaces with a cloth because it will scratch the finishes. 3. Rinse surfaces frequently while washing to flush away dirt that 5-74 Y53-6060-1C1 (03/17)