CAB Cleaning the Chassis Cleaning Interior Vinyl and Upholstery Safety Restraint System - Inspection Hose dirt and grime from the entire chassis. Then, if an oil leak develops, you will be able to detect it easier. Wipe vinyl upholstery and lining with a good commercial upholstery cleaner. Do not use acetone or lacquer thinner. The seat belt system, including webbing, buckles, latches, and mounting hardware, endures heavy use in heavy-duty vehicles, much more than seat belt systems in passenger cars. All users should be aware of the factors contributing to this heavy use and reduced belt life. Corrosive materials used for ice and snow removal and dust control can collect on the underbody.
If these materials are not removed, accelerated corrosion (rust) can occur on underbody parts such as fuel lines, frames, floor pan, and exhaust system, even though they have been provided with corrosion protection. Clean fabric upholstery with upholstery shampoo specially formulated for this purpose. Follow instructions on the container. WARNING! Failure to properly inspect and main- tain restraint systems can lead to in- jury or loss of life. Without periodic inspection and maintenance to de- tect unsafe conditions, seat restraint components can wear out or not pro- tect you in an accident. 5 At least every spring, flush these materials from the under body with plain water.
Be sure to clean any area where mud and other debris can collect. Sediment packed in closed areas of the frame should be loosened before being flushed. If desired, your dealer can do this service for you. (03/17) Y53-6060-1C1 5-75