ELECTRICAL Removing and Installing Batteries: Batteries release gases that are flammable. Batteries are equipped with vent tubes and flash arrestors which vent battery gases out of the cab. Ensure all vent tubes, flash ar- restors and grommets are properly installed and ensure they are clear and functioning properly. Failure to reinstall or keep the vent tubes and grommets clear or ensure the flash arrestor(s) are functioning properly could result in personal injury or equipment damage. Failure to com- ply may result in death, personal injury, equipment or property dam- age. WARNING! Properly secure battery tie downs and battery box cover when rein- stalling batteries after service.
Do not over tighten. Over tightening can crack the battery case which can lead to equipment damage. CAUTION 1. Be sure all switches on the vehicle are turned OFF. 2. Disconnect negative ground cable first. 3. Disconnect positive cable. 4. Unscrew bolt of holding plate with open end wrench. NOTE Always dispose of automotive bat- teries in a safe and responsible man- ner. Contact your authorized dealer for disposal standards. Call your lo- cal authorized recycling center for information on recycling automotive batteries. 5 CAUTION Do not store other items in this bat- tery box. Failure to comply could re- sult in damage to the truck and/or batteries.
Follow the procedure below to reinstall batteries on the vehicle: (03/17) Y53-6060-1C1 5-93