Peterbilt Medium Duty — Batteries

ELECTRICAL Replacing Parts Removed for Access Make sure to reconnect the ground (negative) cable last. NOTE 1. Replace battery cover. Fairings not installed properly could come loose and cause other mo- torists to have an injury accident. It is important that fairings be installed properly. Failure to comply may re- sult in death, personal injury, equip- ment or property damage. WARNING! 2. Install 2 bolts in step strut. Torque to 24-32 lb-ft (33-43 Nm). 1. Place batteries in vehicle and tighten bolt of holding plate. 2. Reconnect positive cable. 3. Install fairing and install 4 bolts. Torque to 6-7 lb-ft (8-9 Nm). 3. Reconnect ground (negative) ground cable. 4.

Install steps by installing 2 bolts in each step. Torque to 24-32 lb-ft (33-43 Nm). WARNING! WARNING! Before attempting any work on the batteries or electrical system, re- move all jewelry. If metal jewelry or other metal comes in contact with electrical circuits, a short circuit may occur causing you to be injured, as well as electrical system failure and damage. Battery replacement may alter or disturb battery cable routing. Check to insure battery cables are free from any point of chaffing. Failure to comply may result in death, per- sonal injury, equipment or property damage. Always reinstall the steps before en- tering the cab.

Without the steps you could slip and fall, resulting in possi- ble injury to yourself. WARNING! 5 5-94 Y53-6060-1C1 (03/17)