NOISE AND EMISSION CONTROL steps to replace the DEF supply pump filter: 1. Turn off the vehicle and allow the vehicle to cool down. Take special precaution with hot exhaust piping. WARNING! The exhaust piping can become ex- tremely hot during engine operation and can cause personal injury includ- ing serious burns to the skin. Allow adequate cooling time before work- ing near any part of the exhaust sys- tem. 3. Using a 27 mm socket wrench (DIN3124), remove the filter cap that is screwed to the DEF Supply pump. 2. Remove the pump protective plate mounted on the bottom of the DEF tank. 5 (03/17) Y53-6060-1C1 5-127