REAR AXLE AND SUSPENSION ensures proper adjustment of the U-bolt and spring assembly. Rear Axle Lubrication Rear Suspension U-Bolts, Grade 8 (lubricated*) Check oil level with the vehicle parked on level ground and the fluid warm. The level should be even with the bottom of the filler hole. WARNING! Do not replace U-bolts and nuts with common U-bolts or standard nuts. These parts are critical to vehicle safety. If the wrong U-bolts or nuts are used, the axle could loosen or separate from the vehicle and cause a serious accident. Use only U-bolts and nuts of SAE Grade 8 specifi- cation or better. Failure to comply may result in death, personal injury, equipment or property damage.
CAUTION 5 Do not mix lubricants of different grades; although, mixing different brands of the same grade lubricant (meeting MIL L2105C), is accept- able. Lubricants of different grades are not compatible and could dam- age the axle. Load the vehicle to its normal gross weight before tightening U-bolts. Loading the vehicle (03/17) Y53-6060-1C1 5-135 U-BOLT SIZE DIAME- TER THREAD TORQUE** Nm Lb-Ft 3/4 333-408 245-300 7/8 598-734 440-540 1 925-1,060 680-780 1-1/8 1,470- 1,660 1,080- 1,220 1-1/4 1,890- 2,120 1,390- 1,560 1-1/2 3,130- 3,860 2,300- 2,840 *Chevron Zinc Lubricant or SAE 20/30 oil should be used on U-Bolt threads **Torque requirements apply to manufacturer proprietary suspensions.
All other suspensions must refer and adhere to original manufacturers shop manual.