REAR AXLE AND SUSPENSION Dana Spicer and Fabco In all cases, lubricant supplier as- sumes full responsibility for the per- formance of their product, and for product and patent liability. NOTE No initial drain is required on Dana Spicer axles that are factory filled with an Dana Spicer-approved synthetic lubricant. All Vehicles with Dana Spicer and Fabco Axles: See Preventive Maintenance Schedule on page 5-12. Contact your dealer for approved synthetic lubricant brands. For recommended types and brands of lubricants, contact your dealer. Petroleum-based lubricants must be drained within the first 5,000 miles (8,000 km) if converting to an approved synthetic lubricant.
Dana Spicer Axles with synthetic lubrication and Out Runner Seals: drain, flush, and refill at 500,000 miles (804,000 km). Initial Change: See Preventive Maintenance Schedule on page 5-12 for standard rear axle service intervals. Change mineral-based lubricant in other Dana Spicer and Fabco axle assemblies (new or rebuilt) within the first 3,000 to 5,000 miles (4,800 to 8,000 km). Axle Housing Breather Vent: Check and clean the axle housing breather vent at each oil level check. 5 Meritor: For petroleum-based axles, use lubricants meeting MIL L2105C/D grade specifications or approved synthetic lubrication. Do not use oil additives. See Meritor Lubrication Maintenance Manual (MM1).
5-136 Y53-6060-1C1 (03/17)