OPERATIONAL PERFORMANCE TEST / Adjustment Procedure 1. Connect Palm (Dr. ZX) to the diagnosing connector in the cab by using the Hot Sync cable and connecting harness. 2. Turn the key switch ON or start the engine. 3. When turning Palm ON, the following screen is displayed on the display of Palm. 3-1. Initial Screen 3-2. Password Setup Screen (When the Select Dr. ZX icon. password has unset) Set the password. 3-3. Service Software Selection Screen Select Large Class ZX-3. + Dr. ZX Connector T1J1-04-06-001 3-4. Function Selection Screen Self-Diagnostic Result + Select Controller + 4. Select “Select (Controller)” and operate according to the instruction under display screen. Palm Dr.
ZX Hot Sync Cable Onnecting Harness T1V1-05-07-002 T4-6-2