TROUBLESHOOTING / Troubleshooting B T5-7-6 Parts Pressure Sensor (Auxiliary) Pressure Sensor (Counterweight Removal) (Optional) Boom Bottom Pressure Sensor Function • Monitors attachment pilot pressure. (Attachment mode control) • Monitors counterweight re- moval pilot pressure for counterweight lifting lever. (Pump control in counter- weight removal) • Monitors boom cylinder bot- tom pressure. (Overload alarm control (optional)) Symptoms in control sys- tem when trouble occurs. • No signals arrive to MC. • No signals arrive to MC. • No signals arrive to MC. Symptoms in machine operation when trouble occurs.
• Even if attachment is oper- ated with auto-idle switch ON, engine speed does not in- crease. • Even if attachment is oper- ated, pump 2 flow rate is kept unchanged. • Even if lever is operated, pressure does not increase and flow rate does not de- crease. • Condition is always over- loaded. • Overload alarm is displayed on the monitor unit. • Overload alarm sounds. Evaluation By MC Fault Code - - Fault Code 11802 is displayed. By Monitor Function Monitor Item: ATT Pilot Pressure Monitor Item: Counterweight Removal Pilot Pressure Monitor pressure change while lifting counterweight. Monitor Item:
Boom Bottom Pressure Using Test Harness - - - Others - - - NOTE • Judge if pressure sensor is faulty or port is clogged by switching pressure sensor with another pressure sensor. • Judge if pressure sensor is faulty or port is clogged by switching pressure sensor with another pressure sensor. - Descriptions of Control (Operational Principle Section in T/M) T2-1 T2-1 T2-1