TROUBLESHOOTING / Troubleshooting B T5-7-18 Parts Swing Parking Brake Release Spool Arm Flow Rate Control Valve Control Spool Proximity Switch (Auto Lubrication System) Function • Be shifted by boom, arm, bucket, swing or auxiliary pi- lot pressure and supplies swing parking brake release pressure. • Shifts arm flow rate control valve (switch valve) during combined operation of boom raise and arm roll-in. • Sets lubricating time and its interval. (Auto lubrication control) Symptoms in control system when trouble oc- curs. • If spool is bound at fully open, swing parking brake is kept released.
(Machine vi- brates while traveling.) • If spool is bound at fully closed, swing parking brake is kept applied. (Dragging is felt.) • If spool is bound at fully closed, boom raise speed is slow during combined opera- tion of boom raise and arm roll-in. • If spool is bound at fully open, arm roll-out speed is slow during combined opera- tion of boom raise and arm roll-out. • No signals arrive to MC. Symptoms in machine operation when trouble occurs. • If spool is bound at fully open, swing parking brake is kept released. (Machine vi- brates while traveling.) • If spool is bound at fully closed, swing parking brake is kept applied.
(Dragging is felt.) • If spool is bound at fully open, arm speed decreases during single arm operation. (Arm flow rate control is al- ways operable.) • If spool is bound at fully closed, swing power be- comes insufficient during combined operation of swing and arm roll-in. (Arm flow rate control is inoperable.) • Auto lubrication is not oper- ated correctly. Evaluation By MC Fault Code - - - By Monitor Function - - Monitor Item: Auto Lubrication Proximity Switch Using Test Harness - - - Others - - - NOTE - - - Descriptions of Control (Operational Principle Section in T/M) T3-3 T2-4,3-6 T2-1