TROUBLESHOOTING / Troubleshooting B E-8 Even if key switch is turned OFF, engine does not stop. (In case engine does not stop, stop engine by pulling engine stop handle located under seat stand. Then, begin in- spection.) Probably the symptoms such as “Engine speed is slower than specification in all operating ranges” or “Even if engine control dial is rotated, engine speed remains unchanged” may come up. Per- form troubleshooting for these symptoms. Check if voltage at terminal #5 in key switch is 24 V. · Key switch: OFF NO Shorted circuit in harness between key switch and ECM. Disconnect connector in ECM. Check if voltage between terminal #24 of harness end of connector and machine is o V.
NO · Key switch: OFF Key Switch: ECM Connector (Harness end) #24 T1GR-05-04-002 T105-07-04-002 T5-7-48 YES Faulty key switch. Faulty ECM. YES