hitachi — PREPARATION FOR PERFORMANCE TESTS

TROUBLESHOOTING / Troubleshooting B A-5 Actuator does not stop even if control lever is returned to neutral. Bound spool in the pilot valve or bound main spool in the control valve is suspected. A-6 Actuator speed is faster than normal Machine mistracks when travel lever is op- erated at half stroke. Precise control cannot be performed. The pump 1 or 2 flow rate is maximized due to some reasons. If the fault code is not displayed, the pump device is displayed, the pump device is faulty. If the fault code is displayed, refer to Trouble- shooting A. YES Faulty pilot valve. Check if actuator stops when pilot shut-off lever is raised.

· When control lever is in neu- tral, pilot pressure is routed to spool end in control valve. Faulty control valve. NO · Although pilot pressure is not routed to spool end in control valve, spool is kept opened due to binding of spool. T5-7-58