TROUBLESHOOTING / Troubleshooting B Change Displayed Fault Code When displaying more than one fault code, press either the upper or bottom side of the temperature control switch key. The following fault code is dis- played. Temperature Control Switch NOTE: Each time the displayed fault code is changed, the buzzer sounds. In case only one fault code exists, the displayed fault code remains unchanged. Delete Fault Code 1. Press and hold both the circulation air switch and the fresh air switch for more than 3 seconds at the same time to delete the fault code. M178-01-017 LCD LCD NOTE: After the fault code is deleted, the buzzer will sound. 2.
After the fault code has been deleted, the LCD displays E {{ . End Fault Code Display Press the fan OFF switch, or press the upper side of the fan switch key. The self-diagnostic mode is complete. Circulation Air Switch Fresh Air Switch Fan OFF Switch Fan Switch T5-4-96 M178-0 M178-0