TROUBLESHOOTING / Electrical System Inspection FUSIBLE LINK INSPECTION AND RE- PLACEMENT Inspection 1. Visually check if fusible links have blown. Replacement 1. Remove the negative cable from the battery. 2. Push (to unlock) and pull to disconnect fusible link connector. Replace the fusible link. 3. Reconnect the negative cable to the battery. Fusible Link M1J1-07-015 Battery Relay Fusible Link BATTERY VOLTAGE CHECK 1. Turn the key switch OFF. Check voltage between the battery positive terminal and the vehicle. Normal Voltage: 24 V T1GL-05-06-001 To Battery Relay NOTE: If voltage is abnormal, recharge or replace the battery. 2. Start the engine.
Check voltage between the battery positive terminal and the vehicle frame. Normal Voltage: 26 to 28 V V NOTE: If voltage is abnormal, check the charging system. T162-05-06-005 T5-8-6