Yanmar — 5.Reassembly

Chapter 7 Reduction and Reversing Gear 1. Construction 3JH2 series 1.2 Specifications Note:

Torque limiter should be installed on KM3P3 No torque limiter installed on KM3P1 & KM35P1 Printed in Japan A0A1015-0302 Printed in Japan A0A1015-0302 7-30 Mode KM3P1 KM3P3 KM35P1 For engine models 3JH25A 3JH30A Clutch Constant mesh gear with servo cone clutch (wet type) Reduction ratio Forward 2.36 3.16 2.61 3.16 2.36 3.16 2.61 3.16 Reverse Propeller shaft mirr1 (Forward) (min-1) 1356 1226 1229 1111 Direction of rotation Input shaft Counter-clockwise, viewed from stern Forward Clockwise, viewed from stern Output shaft Reverse Counter-clockwise, viewed from stern Remote control Control head Single lever control Cable Morse. 33-C (cable travel 76.2mm) Clamp YANMAR made.

standard accessory Cable connector YANMAR made, standard accessory Output shaft coupling Outer diameter (mm) 100 Pitch circle diameter (mm) 78 Connecting bolt holes (mm) 4-1 0.5 Position of shift lever Right side, viewed from stern Lubricating oil API CC SAE 20/30 Lubricating oil capscity ( ) 0.35 0.5 Dry mass (kg) 12 15 12 Reduction ratio No. of blade Diameter of the propeller (mm) Moment of inertia N-m2 (kg-m2=GD 2) Material 2.36 3 450 1.49(0.15) Bronze 4 425 2.61 3 470 1.86(0.19) 4 440 4 460