Komatsu — 4.6.3 PERIODIC SERVICING SCHEDULE

MAINTENANCE 4.6 LUBRICATION AND MAINTENANCE SCHEDULE 4.6.3 PERIODIC SERVICING SCHEDULE (1) Perform maintenance according to separate Engine Operation an Maintenance Manual filed in volume 2 binder. (2) Perform inspections according to the separate Manual ”FIRE DETECTION AND ACTUATION SYSTEM” filed in volume 2 binder.

261 Service Intervals Service Point Service See When necessary Engine Air Cleaners Maintenance page 281 Swing circle toothing Immediately apply grease if bare spots are visible page 285 Automatic lubrication systems Fill grease containers Clean or replace filter elements page 287 Track rollers If leakage occurs replace floating seals and fill with GL ISO VG CLP 220 page 291 Carrier rollers Guide wheels Cold starting aid Replace fluid cartridges page 293 Every 10 operating hours or daily Excavator Walk-around inspection page 295 Working attachment Check grease injectors of auto- matic lubrication system. Check for proper lubrication.

page 299 Swing circle Check grease injectors of auto- matic lubrication system. Check for proper lubrication. page 303 Air cleaners Clean pre-cleaner page 305 Radiators Check coolant level page 307 Track groups Clean, esp. in winter page 307 Engines Check oil level (1) Fire detection and actuation system Inspection (2) Every 50 operating hours or weekly Swing gears and Motor adapter housings Check oil levels page 309 Travel gears, Motor adapter housings and Final drives Check oil levels page 315 PTO’s (Pump distributor gears) Check oil level page 321 Hydraulic access ladder Check safety sensor page 325 Hydraulic oil cooler and radiator Check and clean as necessary page 327