Komatsu — 4.6.3 PERIODIC SERVICING SCHEDULE

4.6 LUBRICATION AND MAINTENANCE SCHEDULE MAINTENANCE (1) Perform maintenance according to separate Engine Operation an Maintenance Manual filed in volume 2 binder. (2) Perform inspections according to the separate Manuals ”FIRE DETECTION AND ACTUATION SYSTEM” and ”FIRE SUPPRESSION SYSTEM” filed in volume 2 binder. (3) Perform inspections according to the separate Manual ”OPERATING INSTRUCTIONS AC” filed in volume 2 binder. (4) Perform maintenance according to separate Service Bulletin "Eliminator Filter" filed in volume 2 binder. Carry out initial service according to item 4.6.1.

262 Service Intervals Service Point Service See Every 250 operating hours or monthly Refrigerant compressor Check drive belt tension page 329 Signal horn compressor Lubricate page 331 Oil cooler fan bearings and Radiator fan bearing Check for leakages and clean breather filters page 331 Automatic lube systems Clean in-line grease screens and breather filters page 333 Cab air cleaner Clean or replace filter element page 335 Air conditioning for Operator’s cab Inspection page 339 Windshield washer reservoir Check fluid level page 341 Engine Maintenance (1) Fire suppression system Inspection (2) Eliminator filter Maintenance check (4) Every 500 operating hours or quarterly Batteries Check fluid level page 343 Fuel tank Drain condensation page 345 Crawler tracks Inspection page 347 Engine and alternator ground cables Check for correct connection page 353 Cab ground cable Check for correct connection page 355 Fire detection and actuation system Maintenance (2) CAUTION CAUTION