MAINTENANCE 4.6 LUBRICATION AND MAINTENANCE SCHEDULE (1) Perform maintenance according to separate Engine Operation an Maintenance Manual filed in volume 2 binder. (2) Perform inspections according to the separate Manual ”FIRE SUPPRESSION SYSTEM” filed in volume 2 binder. (3) Perform inspections according to the separate Manual ”OPERATING INSTRUCTIONS AC” filed in volume 2 binder. Carry out initial service according to item 4.6.1.
263 Service Intervals Service Point Service See Every 1000 operating hours or every 6 months High strength bolt connections Check for correct tightening torque and security page 357 Hydraulic system - Replace return and leakage oil filter elements - Clean or replace pressure filter elements - Clean or replace high pressure filter elements - Replace breather filter ele- ments - Drain sediments page 415 PTO’s (Pump distributor gears) Swing gears and Travel gears Oil sample analysis page 429 Signal horn compressor Clean and lubricate page 431 Hydraulic track tensioning system Check pressure accumulators page 433 Water filter for hand wash sink in Operator’s cab Replace carbon filter cartridge page 435 Hydraulic oil cooler doors and machinery house doors Inspect and lubricate door hinges page 437 Engine Maintenance (1) Fire suppression system Maintenance (2) Air conditioning Inspect the complete system (3) CAUTION CAUTION