Komatsu — 4.6.3 PERIODIC SERVICING SCHEDULE

4.6 LUBRICATION AND MAINTENANCE SCHEDULE MAINTENANCE (*) The hydraulic oil change intervals can be extended for a further time period, when an oil sample analysis shows a positive result. When extending the oil change interval, it is necessary to carry out an oil sample analysis after every 1000 operating hours. However, it is recommended to change the hydraulic oil and the suction strainers after 6000 operating hours at the latest. REMARK The pulsation damper of the hydraulic oil cooler cir- cuit must be replaced after every 2000 operating hours. (1) Perform maintenance according to separate Engine Operation an Maintenance Manual filed in volume 2 binder.

(3) Perform inspections according to the separate Manual FIRE SUPPRESSION SYSTEM filed in volume 2 binder. NOTICE The Lubrication oil Pumps for Pump Distributor Gear Lubri- cation should be replaced with new pumps after every 5000 OPERATING HOURS. 264 Service Intervals Service Point Service See Every 2000 operating hours or yearly. Hydraulic system - Change oil (*) - Replace suction strainers (*) - Replace pulsation damper page 441 Emergency escape ladder Inspect page 453 Fire detection and actuation sys- tem Maintenance (3) Every 3000 operating hours however at least once a year.

Swing gears and Motor adapter housings Change oil page 455 Travel gears, Motor adapter hous- ings and Final drives Change oil page 463 PTO’s (Pump distributor gears) Change oil page 467 Engine Maintenance (1)