Komatsu — HANDLING AIR CONDITIONER

. OPERATION EXPLANATION OF COMPONENTS PRECAUTIONS WHEN USING AIR CONDITIONER NOTICE parts. In addition, never bring any flame near these parts. around the sunlight sensor that may interfere with its sensor function. When the air conditioner is not being used every day, to prevent loss of the film of oil at various parts, run at the engine at low speed from time to time and carry out cooling or dehumidifying heating for several minutes. If the temperature inside the cab is low, the air conditioner may not work. In this case, circulate fresh air to warm the inside of the cab. When the air conditioner switch is turned ON, the air conditioner will work.

If any abnormality is detected in any equipment or sensor used on the air conditioner, "A/C Controller Error" is displayed on the air conditioner monitor screen. If "A/C Controller Error" is displayed, please ask your Komatsu distributor to carry out inspection and repair. 3 - 94 When running the air condition er, always start with the engine running at lo w speed. Never start the air conditioner whe n the d. It will cause failure of the air conditioner.

If water gets into the control pa nel or sunlight sensor, it may lead to unexpec ted failure , be careful not to let water get on these For the auto function of the air c onditioner to work properly, always keep the sunlight sensor clean and do not leave anything WHEN CARRYING OUT COOLING, VENTILATE THE CAB FROM TIME TO TIME If you smoke when the air c onditioner is on, the smoke may start to hurt your eyes, so open t he window and turn the lever to FRESH for a wh ile to remove the smoke while continui ng the co oling. When running the air condit ioner for a long time, turn the lever to th e FRESH position once an hour to carr y out ventilation and cooling.

BE CAREFUL NOT TO COOL T OO MUCH When the cooler is on, set the temperature so that it feels slightly coo l when en tering the cab ( 5 or 6 °C (9 or 10.8 ° F) lower than the outside tem perature). This temperature difference i s conside red to be the mo st suitable for your health, so always be careful to adjust the temperature properly.

INSPECTION AND MAINTENANCE OF AIR CONDITIONER EQUIPPED MACHINE When carrying out an inspe ction and maintenance of a machine eq uipped w ith air condition er, see "REPLACE AIR CONDITIONER BELT ( (PAGE 4-44), CHECK AND PAGE 4-42), CLEAN AIR CONDITION ER AIR F ILTER (FRESH /RECIRC FILTER) ADJUST AIR CONDITIONER (PAGE 4-45)" an d follow the instr uction on the t able.