. OPERATION OPERATION ADJUSTING TILT AMOUNT (Angledozer, tiltdozer) WARNING ANGLEDOZER 3 - 159 When adjust ing the amount of tilt, it is d angerou s if the work equipment is moved b y mistake. Set the wor k equipment in a safe condition, th en stop the eng ine and lock the wor k equipment securel y with the work equipment lock lever. NOTICE The maximu m amount of tilt is 400 mm (1 5.8 in). B e sure not t o exceed 400 mm (15.8 in) . 1. groun put blocks under the fram e so that th e blade does not c ome down. 2. Loosen the bolt (1) of the brace, insert a suitable b ar into h ole (2) of t he brace, and REMARK When turni ng the brace w ith bar, kee p the bl ade above the ground. Right ti lt:
Make right side shorte r, left si Left tilt: Make left sid e shorter, r ight sid