. MAINTENANCE GUIDES TO MAINTENANCE 4 - 3 DUSTY WORKSITES: s follows: to see if the air cleaner is dirty or clogged. avoid clogging. ently. ally the starting motor and alternator, to avoid accumulation of dust. When working at dusty worksites, do a Inspect the dust indicator frequently Clean the radiator core frequently to Clean and replace the fuel filter frequ Clean electrical components, especi ally the starting motor and alternator, to avoid a ccumulation of dust When inspecting or changing the oil, move the machine to a place that is free of dus t to prevent dirt from getting into the oil. AVOID MIXING OILS:
If a different brand or grade of oil has to be added, drain the old oil and replace all the oil with the new brand o r grade of oil. Never mix different brand or grad e of oil. LOCKING INSPECTION COVERS: Lock inspection cover securely into p osition with the lock bar. If inspection or maintenance is performed with with inspection cover not locked in position, there is a danger that it may be suddenly blow shut by t he win d an d cause injury to the worker. BLEEDING AIR: When hydraulic equipment has been re paired or replaced, or the hydraulic piping has bee n removed and i nstalled again, the air must be bled from the ci 4-49)". rcuit.
For details, see "BLEEDING AIR IN HYDRAULIC SYSTEM (PAGE (PAGE PRECAUTIONS WHEN INSTALLING HYD RAULIC HOSES: here there are O-rings or gasket seals, clean the mounting surface, and rget to assemble the O-rings and gaskets. When removing parts at locations w replace with new parts. When doing this, be careful not to fo When installing the hoses, do not tw ist them or bend them sharply. If they are installed so, t heir service life will be shortened extremely and they ma y be damaged. CHECKS AFTER INSPECTION AND MAI NTENANCE: If y ou forget to perform the checks after i nspection and maintenance, unexpected problems may occur, and t his may lead to serious injury or property dama ge.
Always do the following: stopped) ance points been forgotten? nce items been performed correctly? Checks after operation (with engine Have any inspection and mainten Have all inspection and maintena Have any tools or parts been dro inside the machine and get caugh Are there any leakage of coolant Have any inspection and mainten Have all inspection and maintena Have any tools or parts been dro pped inside the machine? It is particularly dangerous i f parts are d ropped t in the lever linkage mechanism. or oil? Have all nuts and bolts been tightened? Are there any leakage of coolant or oil? Have all nuts and bolts been tightened?
Checks when engine is running For the checks when the engine is RUNNING (PAGE 2-31)" in the S Check that the inspected and mai Raise the engine speed and chec For the checks when the engine is running, see "TWO WORKERS FOR MAINTENANCE WHEN ENGIN E IS AFETY section, and take care of safety sufficiently Check that the inspected and mai Raise the engine speed and chec