. MAINTENANCE SERVICE PROCEDURE CLEANING OUTER ELEMENT NOTICE Before and after cleaning the element, do not leave or keep it in direct sunlight. holders (2), then remove cover (3) and take out 4 - 24 1. outer eleme NOTICE Never r emove t he inner element (5). It will allow dirt to en ter and cause failure of the en gine. rewdriver or other tool. Do not use a sc rewdriver or othe 2. Hold the out er element (4), move it carefully up an d down and to th e left an d right, and rot ate the element to the l eft and right while pulling it out. ing the outer element, cover the air connector 3.
After remov insid e the air cleaner body w ith a clean cloth or tap e to prevent dirt o r dust f rom entering. 4. Use a brush or cloth to remo ve all the dirt stuck to c over (3) and the i nside of air cleaner bod y (6). 5. Direc t dry c ompressed air (Max. 0.69 MPa (7 k g/cm2, 99.4 PSI)) from th e inside of the outer element along its folds. Then direc t the co mpressed air fr om the outside along th e folds, and agai n from t he inside.