. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE NOTICE 2) If the yellow element is cleaned, replace both the inner and outer elements. 4 - 25 If small holes or thinner parts are found on the element w hen it is checked with an electric bulb aft er cleaning and drying, replace th When cleaning the elem ent, do not hit it or beat it agains Do not use an element whose folds or gasket or seal are 6. Remove the clot h or tape cover installed in Ste 7. Check that there is no dirt or oil stuck to the sea l portion of the leaned element. Wipe off any NOTICE The inner element m ust not be cleaned and used again .
When replacing the outer element, re place the inner element at the sa me time. If the inner element i s not installed properly and the o uter element and cover are installed, damaged. there is danger that the outer element will be The seal portion on i mitation parts lacks precision, and allows the entry of dust, which leads to damage of the engine. Do not u se such imitation parts. 8. Push the outer element in straight with your hand when air cleaner body. installing it to the If the outer eleme to the left and rig inserted easily. 1) Check that t insert it secu nt is held and rocked lightly up and down and ht while pushing it in, the outer element can be he inner element is not loose.
If it is loose, rely. piston in dust indicator (1) ov erlaps the red he outer diameter immediately after the outer