Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE mm. If the WHEN LOOSENING TENSION WARNING except the procedure given below. If the track tension is not 4 - 29 WHEN INCREASING TENSION Prepare a grease pump. Prepare a 1. 2. 3. 1. Pump i n grease through gre ase fitting (2) with a grea 2. To che ck that the correct ten sion has been achieved, machin e backwards and for 3. Check the track tension aga in, and if the tension is no adjust i t again. 4. Contin ue to pump in greas e until (S) becomes 0 m tension is still loose, the pin and bushing are excessiv so they must be either turne d or replaced. Please co Komat su distributor. It is extreme relieved by t his procedure, please c ontact your Komatsu distri 1.

Remov e 2 bolts (3), then re NOTICE The safet y label is stuck on the back of cover (2), so be car damage t he safety label. When rem oving cover (2), be car eful not to let any dirt or soi 2. Loosen lubricator (1) gradua lly to release the grease 3. Turn lu bricator(1) a maximu 4. If the g rease does not come out smoothly, move the machine forwards and backwards a short distance. 5. Tighten lubricator(1). nsion has been achieved, move the machine backwards and forwards. in, and if the tension is not correct, adjust it again. 6. To che ck that the correct te nsion has been achieved , move th e machine backwards an 7.

Check the track tension aga in, and if the tension is n ot correct , adjust i t again.