. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 9. After replacing the element, push the dust indicator button to ADJUSTMENT WARNING 4 - 28 yellow piston will return t o its original position CHECK AND ADJUST TRACK TENSION The wear of pins and bushings on the und ercarriage wi ll vary w ith th e working conditions an d types of soil. It is thus necessary to con tinually inspect the track tension so a s to maintain the standard tension. bsites where the track Carry out the che ck and adjustment unde r the same conditions as becomes clogged with mud, measure with the track cl ogged w ith INSPECTION e on level ground (travel forward and stop the applying the brake).
between the carrier roller and idler as shown in Stop the machin machine without applying the brake). Put a straight bar between the carrier rolle s show n in the diagram on th e right and measure clear ance A between the bar and the grouser a t the center. The tension (clearance A ) shoul d be 20 to 30 mm (0.8 to 1.2 in). There is danger of p lug (1) flying out under the h igh internal pr essure o f the grease. Never loos en plug (1) more than 1 turn Never loosen any mounting direction If the track tension please contact your