. MAINTENANCE SERVICE PROCEDURE REMARK 4 - 31 ADJUST IDLER CLEARANC The i dler moves forward a worn. become As t hey b ecome worn, ther e is side play in th e idler , or th e idler turns at an angle, causing the track to come off or resulting in uneven wear, s o adjust as follows ressure when this ADJUSTING IN SIDEWAYS DIR 1. Drive the machine for 8 to 12 m (24.4 to 3 6.6 ft) on flat ground, then measure clearanc e A (4 places: left, right, i nside outside) between the track fram e and guide plate. 2.
If clearance A is more than 4 mm (0.158 remove bolt (1), then t ake out shim, and adjust to that the cl earance on one side is les s than 0.5 to 1 mm (0.020 to 0.039 i There are two types of shim (thicknes s: 0.5 mm (0.02 in ) and 1.0 mm (0.0 4 in)).