Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE INSPECTION OF ADDITIONAL WATER SEPARATOR AND CLEANING OF CASING INTERIOR WARNING NOTICE operation. 6. Remove water drain plug (4). 4 - 39 When draini ng fuel from t he wate r separat or, prepare for a container used for catching drained oil a nd take care not to spill fu Spilt fuel ca n cause fire, so wipe it off co mpletely. Fuel can po se danger as it is fla mmable. Never bring fir e near fuel.

When carryi ng out inspection an d maintenance of the f uel system , the particularly careful not to let any dirt or dust get in there is any dirt of dust a round t he fuel s ystem, clean it off thoroughly with fuel before starting th To prevent d irt or dust fro m getti ng into t he fuel circuit, remove all dirt and dust from the surround ing area before starting t Prepare a container to catch drain fu 1. Open ins pection cov er (1) o n the re ar left side of the machine. 2. Put a con tainer unde r drain hose (2 ) to catch dr ained 3. Turn fuel valve (3) to the "S HUTOF F" position ( 4. Loosen w casing. 5. If water is flats: 13 m not drained, loosen air intake plug (5).

(Width across m) Then wat er is drained through drain hose (2).