Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING 3. Using a filter wrench, turn filter cartridge (2) counterclockwise to remove it. 4 - 79 After the eng ine has been op erated, all parts ar e at high temperature, so do not replace the filter i mmediately. Wait for all parts to cool down before starting the operation. High pressur e is generated i nside the engine f uel piping system when t When replac ing the filter, wa it for at least 30 seconds after stopping th e engine to let the inter nal pressure go down before replacing the Do not bring any fire or flame Be careful w hen opening the air bleed plug in the fuel filter head .

It is s till under pressure, so fu NOTICE Genuine Ko matsu fuel filter cartridges use a special filter that has high ly efficient filtering abil ity. When replacing the filter cartridge, al ways use a genu ine Komatsu part . The common rail fuel injectio n system used o n this machine co nsists of more precise parts th an the conventional injection pump and no zzle. If any part ot her than a genui ne Komatsu filter cartridge is used, dust or dirt may get in and caus e problems with the injection system. Alw ays avoid using substitute parts. When carryin g out inspection or maintenance of the fuel system , pay m ore attention than norm al to the entry of dirt.

If dirt is stuck to any part, use fuel to wash it off comp letely. Container t o catch the oil Prepare a f ilter wrench 1. Set the co ntainer under t he filter cartridg e to catch the d oil. 2. Close valv