Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE NOTICE 4 - 80 Do not fill the new fil ter cartridg e with fuel. Remov e cap (B) and install the f ilter c 4. Clea older, coat cartridge t o the fi lter holder. 5. Whe n installing, t ighten unti l the packing surface contacts the sea l surface o f the filter holder, t hen tighten it 3/4 of a turn. If the filter cartrid ge is t ightened too far, th e packing will b e damaged and th is wi ll lead to leakage of fuel. If the filter cartridge is t oo loose, fuel will also le ak from the packing, so always ti ghte n the correct a mount. 6.

After filter cartrid ge (2) has been replaced with a new one , bleed air from th e cartridg e in reference to "BL EED AIR FROM FUEL CIRCUIT (PAGE 4-50) surface of filter cartridge thinl REMARK When o nly the filter c artridge is replaced, it is suffficient that a ir bleeding is carri ed o ut for the filter head alone . But when th e fuel piping is remove d, air bleeding should also be carried out for the injection p ump air-bleeding v alve.